Surtax on imports of steel and aluminum products from China
The federal government intends to apply a 25 per cent surtax on imports of steel and aluminum products from China, effective October 15, 2024.
The initial list of goods subject to surtaxes are those listed below. Descriptions are included for illustrative purposes, with the scope established by the tariff item in column 1. For precise descriptions, please refer to the Schedule to Canada’s Customs Tariff.
| Tariff Item | Indicative Description |
|---|---|
| 7206.10.00 | -Ingots |
| 7206.90.00 | -Other |
| 7207.11.00 | -Containing by weight less than 0.25% of carbon: –Of rectangular (including square) cross-section, the width measuring less than twice the thickness |
| 7207.12.00 | -Containing by weight less than 0.25% of carbon: –Other, of rectangular (other than square) cross-section |
| 7207.19.00 | -Containing by weight less than 0.25% of carbon: –Other |
| 7207.20.00 | -Containing by weight 0.25% or more of carbon |
| 7208.10.00 | -In coils, not further worked than hot-rolled, with patterns in relief |
| 7208.25.00 | -Other, in coils, not further worked than hot-rolled, pickled: –Of a thickness of 4.75 mm or more |
| 7208.26.00 | -Other, in coils, not further worked than hot-rolled, pickled: –Of a thickness of 3 mm or more but less than 4.75 mm |
| 7208.27.00 | -Other, in coils, not further worked than hot-rolled, pickled: –Of a thickness of less than 3 mm |
| 7208.36.00 | -Other, in coils, not further worked than hot-rolled: –Of a thickness exceeding 10 mm |
| 7208.37.00 | -Other, in coils, not further worked than hot-rolled: –D’une épaisseur de 4,75 mm ou plus mais n’excédant pas 10 mm |
| 7208.38.00 | -Other, in coils, not further worked than hot-rolled: –Of a thickness of 3 mm or more but less than 4.75 mm |
| 7208.39.00 | -Other, in coils, not further worked than hot-rolled: –Of a thickness of less than 3 mm |
| 7208.40.00 | -Not in coils, not further worked than hot-rolled, with patterns in relief |
| 7208.51.00 | -Other, not in coils, not further worked than hot-rolled: –Of a thickness exceeding 10 mm |
| 7208.52.00 | -Other, not in coils, not further worked than hot-rolled: –Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 7208.53.00 | -Other, not in coils, not further worked than hot-rolled: –Other, of a thickness of 3 mm or more but less than 4.75 mm |
| 7208.54.00 | -Other, not in coils, not further worked than hot-rolled: –Other, of a thickness of less than 3 mm |
| 7208.90.00 | -Other |
| 7209.15.00 | -In coils, not further worked than cold-rolled (cold-reduced): –Of a thickness of 3 mm or more |
| 7209.16.00 | -In coils, not further worked than cold-rolled (cold-reduced): –Of a thickness exceeding 1 mm but less than 3 mm |
| 7209.17.00 | -In coils, not further worked than cold-rolled (cold-reduced): –Of a thickness of 0.5 mm or more but not exceeding 1 mm |
| 7209.18.00 | -In coils, not further worked than cold-rolled (cold-reduced): –Of a thickness of less than 0.5 mm |
| 7209.25.00 | -Not in coils, not further worked than cold-rolled (cold-reduced): –Of a thickness of 3 mm or more |
| 7209.26.00 | -Not in coils, not further worked than cold-rolled (cold-reduced): –Of a thickness exceeding 1 mm but less than 3 mm |
| 7209.27.00 | -Not in coils, not further worked than cold-rolled (cold-reduced): –Of a thickness of 0.5 mm or more but not exceeding 1 mm |
| 7209.28.00 | -Not in coils, not further worked than cold-rolled (cold-reduced): –Of a thickness of less than 0.5 mm |
| 7209.90.00 | -Other |
| 7210.11.00 | -Plated or coated with tin: –Of a thickness of 0.5 mm or more |
| 7210.12.00 | -Plated or coated with tin: –Of a thickness of less than 0.5 mm |
| 7210.20.00 | -Plated or coated with lead, including terne-plate |
| 7210.30.00 | -Electrolytically plated or coated with zinc |
| 7210.41.00 | -Otherwise plated or coated with zinc: –Corrugated |
| 7210.49.00 | -Otherwise plated or coated with zinc: –Other |
| 7210.50.00 | -Plated or coated with chromium oxides or with chromium and chromium oxides |
| 7210.61.00 | -Plated or coated with aluminum: –Plated or coated with aluminum-zinc alloys |
| 7210.69.00 | -Plated or coated with aluminum: –Other |
| 7210.70.00 | -Painted, varnished or coated with plastics |
| 7210.90.00 | -Other |
| 7211.13.00 | -Not further worked than hot-rolled: –Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief |
| 7211.14.00 | -Not further worked than hot-rolled: –Other, of a thickness of 4.75 mm or more |
| 7211.19.00 | -Not further worked than hot-rolled: –Other |
| 7211.23.00 | -Not further worked than cold-rolled (cold-reduced): –Containing by weight less than 0.25% of carbon |
| 7211.29.00 | -Not further worked than cold-rolled (cold-reduced): –Other |
| 7211.90.00 | -Other |
| 7212.10.00 | -Plated or coated with tin |
| 7212.20.00 | -Electrolytically plated or coated with zinc |
| 7212.30.00 | -Otherwise plated or coated with zinc |
| 7212.40.00 | -Painted, varnished or coated with plastics |
| 7212.50.00 | -Otherwise plated or coated |
| 7212.60.00 | -Clad |
| 7213.10.00 | -Containing indentations, ribs, grooves or other deformations produced during the rolling process |
| 7213.20.00 | -Other, of free-cutting stee |
| 7213.91.00 | -Other : –Of circular cross-section measuring less than 14 mm in diameter |
| 7213.99.00 | -Other : –Other |
| 7214.20.00 | -Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling |
| 7214.30.00 | -Other, of free-cutting steel |
| 7214.91.00 | -Other –Of rectangular (other than square) cross-section |
| 7214.99.00 | -Other –Other |
| 7215.10.00 | -Of free-cutting steel, not further worked than cold-formed or coldfinished |
| 7215.50.00 | -Other, not further worked than cold-formed or cold-finished |
| 7215.90.00 | -Other |
| 7216.10.00 | -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm |
| 7216.21.00 | -L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: –L sections |
| 7216.22.00 | -L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: –T sections |
| 7216.31.00 | -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: –U sections |
| 7216.32.00 | -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: –I sections |
| 7216.33.00 | -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: –H sections |
| 7216.40.00 | -L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more |
| 7216.50.00 | -Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded |
| 7216.99.00 | -Other |
| 7217.10.00 | -Not plated or coated, whether or not polished |
| 7217.20.00 | -Plated or coated with zinc |
| 7217.30.00 | -Plated or coated with other base metals |
| 7217.90.00 | -Other |
| 7218.10.00 | -Ingots and other primary forms |
| 7218.91.00 | -Other: –Of rectangular (other than square) cross-section |
| 7218.99.00 | -Other: –Other |
| 7219.11.00 | -Not further worked than hot-rolled, in coils: –Of a thickness exceeding 10 mm |
| 7219.12.00 | -Not further worked than hot-rolled, in coils: –Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 7219.13.00 | -Not further worked than hot-rolled, in coils: –Of a thickness of 3 mm or more but less than 4.75 mm |
| 7219.14.00 | -Not further worked than hot-rolled, in coils: –Of a thickness of less than 3 mm |
| 7219.21.00 | -Not further worked than hot-rolled, not in coils: –Of a thickness exceeding 10 mm |
| 7219.22.00 | -Not further worked than hot-rolled, not in coils: –Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 7219.23.00 | -Not further worked than hot-rolled, not in coils: –Of a thickness of 3 mm or more but less than 4.75 mm |
| 7219.24.00 | -Not further worked than hot-rolled, not in coils: –Of a thickness of less than 3 mm |
| 7219.31.00 | -Not further worked than cold-rolled (cold-reduced): –Of a thickness of 4.75 mm or more |
| 7219.32.00 | -Not further worked than cold-rolled (cold-reduced): –Of a thickness of 3 mm or more but less than 4.75 mm |
| 7219.33.00 | -Not further worked than cold-rolled (cold-reduced): –Of a thickness exceeding 1 mm but less than 3 mm |
| 7219.34.00 | -Not further worked than cold-rolled (cold-reduced): –Of a thickness of 0.5 mm or more but not exceeding 1 mm |
| 7219.35.00 | -Not further worked than cold-rolled (cold-reduced): –Of a thickness of less than 0.5 mm |
| 7219.90.00 | -Other |
| 7220.12.00 | -Not further worked than hot-rolled: –Of a thickness of less than 4.75 mm |
| 7220.20.00 | -Not further worked than cold-rolled (cold-reduced) |
| 7220.90.00 | -Other |
| 7221.00.00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. |
| 7222.11.00 | -Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: –Of circular cross-section |
| 7222.19.00 | -Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: –Other |
| 7222.20.00 | -Bars and rods, not further worked than cold-formed or cold-finished |
| 7222.30.00 | -Other bars and rods |
| 7222.40.00 | -Angles, shapes and sections |
| 7223.00.00 | Wire of stainless steel. |
| 7224.10.00 | -Ingots and other primary forms |
| 7224.90.00 | -Other |
| 7225.11.00 | -Of silicon-electrical steel: –Grain-oriented |
| 7225.19.00 | -Of silicon-electrical steel: –Other |
| 7225.30.00 | -Other, not further worked than hot-rolled, in coils |
| 7225.40.00 | -Other, not further worked than hot-rolled, not in coils |
| 7225.50.00 | -Other, not further worked than cold-rolled (cold-reduced) |
| 7225.91.00 | -Other: –Electrolytically plated or coated with zinc |
| 7225.92.00 | -Other: –Otherwise plated or coated with zinc |
| 7225.99.00 | -Other: –Other |
| 7226.11.00 | -Of silicon-electrical steel: –Grain-oriented |
| 7226.19.00 | -Of silicon-electrical steel: –Other |
| 7226.20.00 | -Of high speed steel |
| 7226.91.00 | -Other: –Not further worked than hot-rolled |
| 7226.92.00 | -Other: –Not further worked than cold-rolled (cold-reduced) |
| 7226.99.00 | -Other: –Other |
| 7227.10.00 | -Of high speed steel |
| 7227.20.00 | -Of silico-manganese steel |
| 7227.90.00 | -Other |
| 7228.20.00 | -Bars and rods, of silico-manganese steel |
| 7228.30.00 | -Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded |
| 7228.40.00 | -Other bars and rods, not further worked than forged |
| 7228.50.00 | -Other bars and rods, not further worked than cold-formed or coldfinished |
| 7228.60.00 | -Other bars and rods |
| 7228.70.00 | -Angles, shapes and sections |
| 7229.20.00 | -Of silico-manganese steel |
| 7229.90.00 | -Other |
| 7301.10.00 | -Sheet piling |
| 7302.10.00 | -Rails |
| 7302.40.00 | -Fish-plates and sole plates |
| 7302.90.00 | -Other |
| 7304.11.00 | -Line pipe of a kind used for oil or gas pipelines: –Of stainless steel |
| 7304.19.00 | -Line pipe of a kind used for oil or gas pipelines: –Other |
| 7304.22.00 | -Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: –Drill pipe of stainless steel |
| 7304.23.00 | -Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: –Other drill pipe |
| 7304.24.00 | -Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: –Other, of stainless steel |
| 7304.29.00 | -Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: –Other |
| 7304.31.00 | -Other, of circular cross-section, of iron or non-alloy steel: –Cold-drawn or cold-rolled (cold-reduced) |
| 7304.39.00 | -Other, of circular cross-section, of iron or non-alloy steel: –Other |
| 7304.49.00 | -Other, of circular cross-section, of stainless steel: –Other |
| 7304.51.00 | -Other, of circular cross-section, of other alloy steel: –Cold-drawn or cold-rolled (cold-reduced) |
| 7304.59.00 | -Other, of circular cross-section, of other alloy steel: –Other |
| 7304.90.00 | -Other |
| 7305.11.00 | -Line pipe of a kind used for oil or gas pipelines: –Longitudinally submerged arc welded |
| 7305.12.00 | -Line pipe of a kind used for oil or gas pipelines: –Other, longitudinally welded |
| 7305.19.00 | -Line pipe of a kind used for oil or gas pipelines: –Other |
| 7305.20.00 | -Casing of a kind used in drilling for oil or gas |
| 7305.31.00 | -Other, welded: –Longitudinally welded |
| 7305.39.00 | -Other, welded: –Other |
| 7305.90.00 | -Other |
| 7306.11.00 | -Line pipe of a kind used for oil or gas pipelines: –Welded, of stainless steel |
| 7306.19.00 | -Line pipe of a kind used for oil or gas pipelines: –Other |
| 7306.21.00 | -Casing and tubing of a kind used in drilling for oil or gas: –Welded, of stainless steel |
| 7306.29.00 | -Casing and tubing of a kind used in drilling for oil or gas: –Other |
| 7306.30.00 | -Other, welded, of circular cross-section, of iron or non-alloy steel |
| 7306.40.00 | -Other, welded, of circular cross-section, of stainless steel |
| 7306.50.00 | -Other, welded, of circular cross-section, of other alloy steel |
| 7306.61.00 | -Other, welded, of non-circular cross-section: –Of square or rectangular cross-section |
| 7306.69.00 | -Other, welded, of non-circular cross-section: –Of other non-circular cross-section |
| 7306.90.00 | -Other |
| Tariff Item | Indicative Description |
|---|---|
| 7601.10.00 | -Aluminum, not alloyed |
| 7601.20.00 | -Aluminum alloys |
| 7604.10.00 | -Of aluminum, not alloyed |
| 7604.21.00 | -Of aluminum alloys: –Hollow profiles |
| 7604.29.00 | -Of aluminum alloys: –Other |
| 7605.11.00 | -Of aluminum, not alloyed: –Of which the maximum cross-sectional dimension exceeds 7 mm |
| 7605.19.00 | -Of aluminum, not alloyed: –Other |
| 7605.21.00 | -Of aluminum alloys: –Of which the maximum cross-sectional dimension exceeds 7 mm |
| 7605.29.00 | -Of aluminum alloys: –Other |
| 7606.11.00 | -Rectangular (including square): –Of aluminum, not alloyed |
| 7606.12.00 | -Rectangular (including square): –Of aluminum alloys |
| 7606.91.00 | -Other: –Of aluminum, not alloyed |
| 7606.92.00 | -Other: –Of aluminum alloys |
| 7607.11.00 | -Not backed: –Rolled but not further worked |
| 7607.19.00 | -Not backed: –Other |
| 7607.20.00 | -Backed |
| 7608.10.00 | -Of aluminum, not alloyed |
| 7608.20.00 | -Of aluminum alloys |
| 7609.00.00 | Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves). |
Source: Department of Finance Canada
Subscribe to the Farrow Pulse!
